When you hire a contractor, you want professional work and quality products. Georgian Insulation understands and is committed to customer satisfaction. Our pictures show the care we take in working in your property. Click on picture to view larger image/slideshow.
Spray Foam Insulation
Insulation Foam sprayed to quonset style shop
Installing Spray Insulation Foam
Insulating a quonset style building
Walltite Eco Foam, sprayed directly onto a roof deck
Attic retrofit in a church
Spray foam on attic floor
This old insulation resulted in a cold drafty wall. The insulation was removed ready for spray foam.
R23 spray foam was installed between the 2x4 studs and in the rim joist
The Iso board and spray foam resulted in R33 in a 2x4 wall
The new siding finished of the project.
Spray Insulation foam around bay window
Spray foam installed from exterior
Installing Instulation in Commercial building
Spray foam in workshop
Measuring adhesion of spray foam Insulation
Measuring depth of spray Insulation foam
Walltite ECO Spray Foam Insulation
A well deserved coffee break after hard working installing insulation
Our new Vecloader, powerful HEPA Vacuum used to remove asbestos
Removed insulation being disposed at landfil
Our powerful truck mounted vacuum, quickly removes attic insulation
Removal of vermiculite, fiberglass and vermiculite containing asbestos.
An attic containing vermiculite and old insulation. This insulation is no longer effective and should be removed.
Attic Insualtion Removed
Removing Insulation from Home
Fireproofing, Grace Monokote
Grace Monokote being applied, to repair fireproofing damaged by construction.
Grace Monokote on steel deck
Grace Monokote, sprayed over foam as a thermal barrier.
Thermal barrier over spray foam
The beam is wrapped in galvanized mesh to help the Monokote bond to the steel.
Repair to damaged fireproofing
Grace Monokote Ceiling
Flir Thermal Images
Flir B300 Professional series, Infra Red imaging
Cold spot around electrical fixture and along the top plate.
Cold spots along the top plate, poorly fitting insulation and cold door.
Air leakage around light switch.
Air leakage under door.
This attic had no insulation.
Insulation missing in walls of Dormer.
Racoons had been living in this attic and the walls of an empty house. The IR scan was able to quickly identify the problem areas, saving thousands in renovation costs.
IR scan of Dormer
Poor insulation at the edge of an attic, showed up as a cold zone on the ceiling.
IR scan of attic insulation
Moisture detected on ceiling vapour barrier
Air leakage around pot light.
Low density fiberglass insulation, showing heat loss into attic.
Poor insulation around pot light and in the ceiling.
Insulation missing in cathedral ceiling.
Nylon mesh is fastened to the studs. Fiberglas is then blown in to achieve R24 in a 2x6 cavity.
Bibs system blown into a cathedral ceiling and knee wall.
BIBS in the walls
The bibs insulation provides a perfect blanket every time. The insulation takes on the shape of the structure with no voids.
Our certified installers carefully fill every cavity.
A completed wall.
A special mesh is attached to the structure, it holds the insulation in place, ensuring every cavity is completely filled.
Bibs fiberglas insulation and vapour barrier
BIBS in a wall in Home
Blown insulation in the basement wall and Walltite Eco spray foam in the Ring joist. The best way to insulate and seal the ring joist.
BIBS in a cathedral
Georgian Insulation Systems BIBS
Georgian Insulation BIBS System
BIBS in walls
The Bibs mesh is neatly trimmed.